Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Famco Chimney Sweep in Atlanta: What to Know First
We provide independent Famco chimney sweep and inspection service across Atlanta, typically completing a standard sweep and Level 1 inspection in about 90 minutes from arrival to cleanup. Most Famco chimney sweeps in Atlanta run between $189 and $349 depending on flue condition, creosote stage, and whether you need a Level 2 camera inspection. If you own a Famco fireplace or chimney component and you’re not sure when it was last swept, call (762) 320-6525 and we’ll give you a straight answer and a written price before anyone picks up a brush.
This page is for Atlanta homeowners with Famco chimney systems who want to know what actually needs cleaning, what it should cost, and what we find on Famco units specifically. We’re an independent Famco service provider, not a manufacturer affiliate, which means we tell you what the unit needs without a brand loyalty filter.
How Famco Products Fail – and How We Fix Them
Famco builds solid chimney and venting components, but Atlanta’s humidity and our wood-burning habits create predictable wear patterns. Here’s what we see on Famco jobs across the metro area:
- Famco stainless steel chimney caps and spark arrestors clog with creosote glaze faster than most. The mesh on Famco caps is fine enough to stop embers but tight enough to catch tar vapor. In Atlanta’s damp winter air, that vapor condenses and glazes the mesh shut, which chokes the draft and pushes smoke back into the living room. We pull the cap, document it with photos, and clean or replace it with a Famco-spec cap that keeps the draft open.
- Famco anchor plate and flue tile joints collect soot at the offset. Older Famco installations around Atlanta, especially in Midtown condos and Decatur bungalows, used offset flue tile runs. The elbows are where soot and creosote accumulate fastest, and they’re also where a standard brush misses if the tech doesn’t adjust the sweep pattern. We sweep from the top down and then run a camera through to confirm the offsets are clear.
- Famco fireplace dampers stick or seize after a few seasons of use. The cast-iron damper plates on many Famco fireplaces warp slightly under repeated heating and cooling. Once warped, they don’t seat fully, which lets conditioned air escape up the flue in summer and cold air dump down in winter. During every Famco sweep, we check damper seating and show you a photo if it’s not closing right.
- Famco chimney chase tops on newer Roswell and Alpharetta homes rust at the fastener points. Atlanta’s summer thunderstorms and high humidity hit chase tops harder than the dry heat Famco components were often tested in. The fasteners corrode first, then the rust spreads under the flashing. We catch this on the roof inspection during the sweep and tell you whether it’s a clean-and-reseal or a chase top replacement.
- Famco fireplace glass doors develop hazy creosote film that regular cleaners won’t cut. This is the one that drives people crazy. The film bakes onto the glass during low, smoldering fires, and once it’s baked on, kitchen glass cleaner does nothing. We use a fireplace-specific cleaner that lifts the film without scratching the ceramic glass, and we’ll tell you how to burn hotter, shorter fires to keep it from coming back.
Styles & brands we work with





Our Famco Chimney Sweep Process
Here’s what happens when you book a Famco chimney sweep with Hadley Chimney Atlanta, from the first call to the final photo:
- 1
You call (762) 320-6525 and talk to a live person. No voicemail tag. We ask about your Famco unit, when it was last swept, and whether you’ve noticed any smoke spillage or odd smells.
- 2
We send a tech in a tracked arrival window. You’ll know who’s coming and when, with live arrival updates like the map apps you already use. Background-checked, uniformed, and familiar with Famco components.
- 3
The tech inspects before sweeping. We check the firebox, damper, flue, cap, and chase top. If we see creosote, soot, or damage, we document it with photos before any cleaning starts.
- 4
We sweep the flue and clean the firebox. The brush size matches your Famco flue dimensions, and we adjust the pattern for offsets and tight spots. We also clean the smoke shelf and damper area, which most quick sweep services skip.
- 5
We run the camera and walk you through the photos. This is the part Cory Mitchell insists on. You see the flue before and after. If something needs a repair, you see the photo of the exact problem, not a vague warning.
- 6
You get a written price for any recommended work, then we clean up and leave. Drop cloths down, floors swept, cap resecured. Every repair comes with a written guarantee and a free second visit if it fails.
See the difference
Before
After
Before
After
Before
AfterWhat Famco Chimney Sweep Costs in Atlanta
Here’s what you should expect to pay for Famco chimney service in Atlanta, based on what we’ve been seeing across the metro this season:
| Service | Typical Atlanta Range |
|---|---|
| Standard Famco chimney sweep + Level 1 inspection | $189 – $249 |
| Sweep + Level 2 camera inspection (bought house, no sweep history, after chimney fire) | $269 – $349 |
| Heavy creosote removal (Stage 3 glaze) | $329 – $449 |
| Famco damper repair or replacement | $175 – $425 depending on part and access |
| Famco chimney cap replacement | $189 – $389 depending on cap size and material |
What moves the price: flue height, creosote stage, how long since the last sweep, and whether the cap or damper needs parts. We give you a written price before any work starts, every time. Call (762) 320-6525 for a free estimate on your Famco unit.
Why Atlanta Homeowners Call Hadley Chimney Atlanta for Famco Work
We’ve been at this since 2003, and the reason Atlanta homeowners keep calling us for Famco chimney work is simple: we show you what we found and we stand behind what we fix. Every repair carries a written guarantee, and if something fails within 365 days, we come back and make it right, free. That’s not a promotion. That’s the 365-Day Done Right Promise.
Our techs know Famco components because they see them across Atlanta year-round: in the older brick ranches of East Point, the mid-century builds in Smyrna, and the newer construction up in Cumming. When a Famco part is available and worth using, we use it. When an aftermarket part from DuraFlex, HeatShield, or Gelco is the better call for longevity or warranty reasons, we’ll tell you that too, with the same photo and written-price standard. The point is, you make the call with full information, and you can always reach a live person at (762) 320-6525.
FAQs
Yes, we sweep and inspect all Famco chimney systems including wood-burning fireplaces, prefabricated units, and venting components. We work on the full range of Famco fireplaces found in Atlanta homes. If you’re not sure whether your setup uses Famco parts, call (762) 320-6525 and we’ll help you identify it.
No. Routine chimney sweeping and inspection are required maintenance for any fireplace warranty, and using an independent service does not void Famco’s coverage. What voids warranties is neglecting creosote buildup until it damages the flue or firebox. A documented sweep with photos actually protects your position if you ever need a warranty claim. We provide that documentation on every job.
During the fall and winter sweep season, we’re usually booking about 3 to 7 days out across metro Atlanta. Spring and summer jobs are typically faster. You’ll get a live arrival window with tracking on the day of service, and there’s a real person on the phone 24/7 if you need to book or ask questions at 1 a.m.
You’ll see the same photos we see, and you’ll get a written price for any recommended repair before we touch anything else. If a repair fails within 365 days, we come back free. We don’t push liner replacements or masonry work unless the camera shows a clear problem. And we’ll tell you plainly when something can safely wait.
When a Famco part is the right call, we order it. When a comparable aftermarket part from DuraFlex, HeatShield, or Gelco will last longer or costs less to install, we tell you that too, with the reasoning and the price difference on the table. You always choose. We never substitute parts without your approval.
Ready to book? Call (762) 320-6525 for a free estimate on your Famco chimney sweep in Atlanta. A live person answers, and you’ll have a written price before any work begins.
Written by Cory Mitchell, Owner, Hadley Chimney Atlanta at Hadley Chimney Atlanta, serving Atlanta and nearby areas.